Full day silversmithing class and all of it's fabulousness!!
 

Mask Lariat

11/03/2014

 
Pam wanted to come in and finish her large mask piece she carved and cast into silver in Lars casting class.  She created 3 independent pieces that needed to be soldered together with a chain through the loop part.  Pam loves mask's and I love her design!  We also water casted her scrap silver then assembled and soldered the pieces into this beautiful pendant!  It was a productive private class!
 
 
A cool custom mens wedding band was made today by folding the organic shaped silver sheet over a textured piece of copper.  My friend Amy also came in and made herself a second ring with a beautiful Botswana agate stone!
 
 
Had 6 great students in the silversmithing class! Lots of beautiful sterling silver jewelry made! 
 

Date night!

06/06/2014

 
Fun students on a date tonight, they say a happy wife makes a happy life!
 
 
and another minute and a half here to finish it off.....
 
 
I love it when Connie flies in from Texas to come make jewelry with me! She has a great artistic eye and always has a beautiful and very creative project or three in mind. This time was no exception and I was very excited that she wanted to make a large layered chunky cuff with a stone she brought and matching pendants. She is a natural with the tools and torch and likes to let her pieces grow organically in the process. I’ve lost track of how many designs she has created with me but I think this cuff is one of my very favorites so far. She gives away most of her projects as gifts and there are some very lucky recipients out there! I can’t wait to see what she wants to create next year!
 

Studio Setup List

05/30/2012

 
Picture
The most common question I get asked when someone gets the jewelry making fever is “what tools and equipment do I need to set up a studio and how much does it cost?” Prices have changed in the 10+ years I have gone through quite a few tools in those years so I have a few opinions on a few things. I am someone who LOVES tools and will buy them just to try them out; but I am also someone who likes simplicity and efficiency so some tools haven’t been worth what I paid for them and are now sitting in a drawer waiting for their next life.

I started small in my front room and bought tools as I could and have been blessed to be able to build up to my 500 square foot studio I have now. A few years ago I figured out a basic setup for a friend that I set up a studio for and it came to around $2000 with out the buffer and ventilation. This is my “basic” list of things I can’t live without and my most used tools. They are in no particular order and most are specific to jewelry making so you can’t just run down the street to Home Depot to pick them up unfortunately. The catalogs I order from the most are RioGrande.com, Indian Jewelers Supply ijs.com, and OttoFrei.com. Also, keep your eye out for used tools in your local classifieds or local rock shops.

I have *starred tools that I highly recommend you spend a little more money on because they are worth it and I put a + sign next to non-jewelry specific tools you may already have or can get easily at hardware stores.

+sturdy bench/*jewelers bench
+good lighting/*bench lamp
metal cutters (for cutting sheet metal)heavy cutters for heavy bands
*flat nose pliers - multiple pairs
*wire cutters
cross lock tweezers - multiple pairs
wire picks
flux
flux brushes
flux holder
+water bowl
soldering block
+lazy susan (under soldering block)
tripod with screen
needle nose pliers - multiple pairs
striker
+acetylene tank, +hoses, +gauge, and *handle with a *0 (zero) and *1 tip (I recommend buying them all together)

*PROPER VENTILATION (PLEASE do not solder in your living space where your furnace can circulate the fumes and chemicals all through your house. Your health, your family, and your brain cells will thank me later! And NO, opening up a window is not considered proper ventilation!) (I can email you a photo of my setup if you need an idea of what it should look like)

metal block
+anvil
*0 (zero) cut half round ring files
+large bastard files
deep throat saw frame
*saw blades
scale
*chasing hammers
*ball peen hammer
+small claw hammer
standard jewelers gauge (ruler for ring and bracelet sizes)
leather mallet
ring mandrel
bracelet mandrel
burnisher
*+drill with flex shaft
black polishing wheels
pickle
+crockpot
+3M wheel - brushed finish
muslin wheels (Fine and Mirror finish)
silica free brown compound for Fine wheel (step 1)
Zam - for mirror finish wheel (step 2)
inside ring polisher
*buffing machine (I prefer the 2 stage with ventilation, your health and brain cells will thank you for this too!)
Great sound system to crank your music or audiobooks that get the creative juices flowing!

Things I use all the time but not necessary to get started:
crucible with handle
ingot maker
*punch and die set
rolling mill

If you have any questions about any of these please contact me for further explanation or if you need help setting up shop!

Your studio should be a happy, bright, inspiring space that you will want to spend hours in! Treat it like such by bringing in things that spark your creativity and help you focus on your vision! 

I would love to see pictures of your studio space, you can email me photos, tag me on FB or Pinterest or invite me over!

Happy creating! <3B.

 
 
This is a day that goes in the record books for me! I have never had this many students in one day! It started out with 20 something high school students coming down from a charter school in Ogden, then had 2 of my sailor buddies make a pendant and a ring, and to finish the day I started a casting class that evening with 4 more students! It was a high energy day with great tons of creative output! You can believe I slept well that night!
 
 
Finished the silversmithing class last week and really loved the creative jewelry the ladies made! They wanted to do some rings that were not really beginner projects =)  but we dove right in and I love how they turned out!